DESCRIPTION
This is a pour point depressant to provide the most cost-effective solution to keep your automotive lubricants flowing in the cold. It provides the versatility you need to effectively treat the wide range of new generation base stocks available in the market today and thus permits product rationalization. It is highly recommended for use in a wide variety of engine oils, gear oils, hydraulic and transmission fluids.
TYPICAL PHYSICAL PROPERTIES
TYPICAL DOSAGES IN FINISH LUBRICANTS
Depending on the degree of depression desired, the typical dosages would range as follows :
- Engine Oils : 0.1 – 0.5 % w/w
- Gear Oils : 0.2 – 1.5 % w/w
FLUIDITY IMPROVEMENT
it also used as a fluidity improver in lubricants which must meet stringent low temperature viscosity requirements under low shear rate conditions such as engine oils, hydraulic and transmission fluids and gear oils.
BASE STOCK SOLUBILITY AND COMPATIBILITY
These Series are completely soluble in all new generation base stocks at any concentration.In finish lubricants they are compatible with other commonly used additives.
EFFECT ON OIL PROPERTIES AT TYPICAL TREAT RATES
Table below summarizes the effect of this series on the key rheological characteristics of a lubricant
- Viscosity Index : Negligible
- Pour Point : > Strong Positive
- MRV TP-1 Viscosity : Strong Positive
- Brookeld Viscosity : Strong Positive
- Kinematic Viscosity (@-20° C & 30° C) : Strong Positive
- CCS Viscosity : Negligible
- Shear Stability : Negligible
